Define a Problem:
Generate Concepts: The main goal of this project was to assemble and test a Random Number Generator kit that randomly displays a number between 1 and 6 in the patterns usually seen on a die board game. So we used a VEX kit to assemble a random number generator by soldering all the pieces onto the board and then tested it.
Evaluate the Solution: This project was fun along with also being challenging. There were many components that went into doing this project. The main component was the blank circuit board which was what all the other components were soldered onto. All the different components were LED's, capacitors, resistors, a button and switch, IC sockets, battery holder and batteries. All of the components had to be put into the right spot and then soldered onto the board from the back. Once each lead was soldered, the excess metal was cut off so that the lead was almost flush with the board. I did not encounter any problems while soldering, but once i was finished was when my only problem surfaced. Two of my light emitting diodes were not lighting up.